One of the most important parts in the construction of apartments is building electricity and wiring. For building protection and safety reasons, the standards of electrical installation and operation of buildings must be observed. Especially in cases where the desired building is an old building about 10 or 15 years old. The purpose of this article is to examine the steps of installing electricity in a building. Basically, all the electrical installations of the building must be connected to the circuit breaker in order to protect and establish security and any accidents. Also, on the floor, necessary measures should be taken to drain the electric current from the ground surface.
The tool for installing the building's electricity
Be sure to be fully familiar with the concept of building electricity. By fully understanding the concept of building electricity, you can do the wiring easily. The circuit breaker is one of the main things that should be taken care of as mentioned above. Connection protectors, contactors, reliable and appropriate drivers, of course, in addition to these, other tools are also used in building electrical connections. For example, in wet places such as the wall of the bathroom or the kitchen, the necessary safety measures should be taken to protect the dangers in the electrical wiring of the building. Also, in the exits and entrances of the private and common areas, the necessary measures must be taken and the established standards must be observed. You must also specify how many sockets and switches you need for each room. It is necessary to electrify the building. You should think exactly about the tools you choose. In most cases, single-phase connections should be used for wiring the building's electricity, which supports about 230 volts of electricity for the electrical wiring system of your desired house, but for cases that need If you have more energy, you should use a 3-phase connection with 380 volts. Among the items that you need three-phase electricity for wiring are connections related to electric saunas.
Boxes
Division boxes have different sizes and types are available in the market. The most common distribution boxes are aluminum distribution boxes, which are waterproof and protect the wires from dust. Of course, it should be said that metal partition boxes also have their own benefits and uses. For example, metal distribution boxes show high resistance to fire. Apart from metal, aluminum and metal, the partition boxes are also plastic and galvanized, and a separate use can be stated for them as well.
Building electricity standards
For works such as building electrification, it is a clear and natural issue to comply with building electrification standards. Compliance with these standards is necessary to prevent accidents due to faulty wiring. Standard regulations are constantly changing because the older the building, the more standard regulations are. The NF C 15-100 standard includes all regulations related to low voltage building electrical installations and also related to residential buildings. Other standards that can be mentioned are the main international standards and the International Electronics Commission standard, as well as the HD 384 standard, which is actually a French standard. This standard was implemented in 2010. It also includes residential complexes and old buildings
Another standard that complements the recent standard is the XP C16-600 standard, which complements the previous standard regarding the sale or lease of residential properties. The recent standard diagnosis must be mentioned in the file so that it is included in the file in cases of shared sales. For a better understanding of what building electricity is and a better understanding of these things, technical building electricity training can be useful for you. These standards are also widely used in building electrical wiring and should be used.